MOCUTE-061

MOCUTE-F version - Upgrade operation video MOCUTE-F version upgrade operation video, the video is MOCUTE-060F, and the operation method for other models is the same!

Play
MOCUTE-FS Android upgrade tool (Version F - latest version) (Update 2025-11-09 ,new-version) latest version): Update the optimized joystick center dead band (calibration is required after upgrading before use) F/M version 062M/061F/060F/053F/054F/058F/059F optimization center dead zone test version software. Usage: When upgrading, there is no need to connect Bluetooth pairing in the mobile system (pairing may fail). Simply connect to the upgrade tool and upgrade! After upgrading, calibration is required before use!!!! Calibration method: After entering the calibration mode, rotate the maximum diameter of the joystick by two turns (to detect the maximum edge of the edge); Release the joystick again and center it naturally (to detect the center point). Then press the power button to shut down (automatically save). If it's not can't to use, you can provide feedback on the issue in the group after the letter and upgrade back to the laterofficial version - F version!
Left handle: [Right+Down+Power button]

Right handle: [A+X+power key]
to power up.The upgrade tool can only be used when the Bluetooth is called MOCUTE-FS after startup. When upgradingIt is not necessary to connect and pair Bluetooth in the mobile phone system (pairing fails), Connect the upgrade tool directly. After the upgrade is successful, you need to Calibrate joystick: Press
Left handle [LB+LT+Power Key]

Right handle:[B+Y+Power key]
to power up,Turn the maximum straight outer diameter of all rocker rods for two turns and then release them, and then long press the power key to shut down.

Download
MOCUTE-061 (Address 2 groups) upgrade tool For situations where there are multiple MOCUTE-061 devices in a living room, a set of controllers can be upgraded to an address (both left and right controllers need to be upgraded). After the upgrade, the right controller will not automatically connect To other groups (factory default is address 1 group) Upgrade method with Android phone: When the controller is turned off, press the controller
Left handle: [Right+Down+Power button]

Right handle: [A+X+power key]
to power up.The upgrade tool can only be used when the Bluetooth is called MOCUTE-FS after startup. When upgradingIt is not necessary to connect and pair Bluetooth in the mobile phone system (pairing fails), Connect the upgrade tool directly. After the upgrade is successful, you need to Calibrate joystick: Press
Left handle [LB+LT+Power Key]

Right handle:[B+Y+Power key]
to power up,Turn the maximum straight outer diameter of all rocker rods for two turns and then release them, and then long press the power key to shut down.

Download
MOCUTE-061 (Address 3 groups) upgrade tool For situations where there are multiple MOCUTE-061 devices in a living room, a set of controllers can be upgraded to an address (both left and right controllers need to be upgraded). After the upgrade, the right controller will not automatically connect To other groups (factory default is address 1 group) Upgrade method with Android phone: When the controller is turned off, press the controller
Left handle: [Right+Down+Power button]

Right handle: [A+X+power key]
to power up.The upgrade tool can only be used when the Bluetooth is called MOCUTE-FS after startup. When upgradingIt is not necessary to connect and pair Bluetooth in the mobile phone system (pairing fails), Connect the upgrade tool directly. After the upgrade is successful, you need to Calibrate joystick: Press
Left handle [LB+LT+Power Key]

Right handle:[B+Y+Power key]
to power up,Turn the maximum straight outer diameter of all rocker rods for two turns and then release them, and then long press the power key to shut down.

Download
MOCUTE-061 (Address 4 groups) upgrade tool For situations where there are multiple MOCUTE-061 devices in a living room, a set of controllers can be upgraded to an address (both left and right controllers need to be upgraded). After the upgrade, the right controller will not automatically connect To other groups (factory default is address 1 group) Upgrade method with Android phone: When the controller is turned off, press the controller
Left handle: [Right+Down+Power button]

Right handle: [A+X+power key]
to power up.The upgrade tool can only be used when the Bluetooth is called MOCUTE-FS after startup. When upgradingIt is not necessary to connect and pair Bluetooth in the mobile phone system (pairing fails), Connect the upgrade tool directly. After the upgrade is successful, you need to Calibrate joystick: Press
Left handle [LB+LT+Power Key]

Right handle:[B+Y+Power key]
to power up,Turn the maximum straight outer diameter of all rocker rods for two turns and then release them, and then long press the power key to shut down.

Download
MOCUTE-061 PC Upgrade Tool (Version F) (Update-2025-11-09 V1.17)

Detailed

Firmware update