UNKNOW_TYPE

Is there a delay in the handle?
Solution 1: Cancel Bluetooth pairing on the mobile phone and pair again (note that Bluetooth is not disconnected, it is necessary to cancel pairing) Solution 2: If Method 1 does not solve the problem, press the power button on the handle to shut down the device first, then press and hold the power button again for more than 8 seconds before releasing it (release when the light flashes quickly), Go to the handle end again to search for pairing. (To cancel the previously paired Bluetooth name first). Solution 3: If Method 2 does not solve the problem, upgrade the latest firmware of the controller and calibrate it to try again.
How to calibrate the joystick?

1.Press the [B+Y+power key] on the handle to start the machine (press and hold the B and Y keys when the machine is off, and then press the power key at the same time to start the machine) until the light is on, and then release it.

2. Turn the maximum straight outer diameter of the rocker for two turns, and then loosen it (turn it for two turns at will, the starting point has nothing to do with the ending point, and the software only detects the value of the maximum edge).

3. Press and hold the power key to shut down (this step is very important, and the calibrated data will be saved in the handle after normal shutdown).
How to restore the handle to factory settings?
Solution: The same as "How to calibrate the joystick?" The method is the same. After calibration and shutdown, the handle will return to the factory setting.
Xiaomi/Hongmi can't use the handle normally?
Solution to the problem that Xiaomi/Hongmi can't use the handle normally: (1) Go to the bottom of the [Settings] - [Accessibility] - [Limbs] menu of the mobile phone, Find [Keyboard, Mouse and Touch Pad] -[Use on-screen keyboard] - Open this option. (2) Set the inside, turn off, turn on, and then turn off the one handed mode (after repeating twice, turn off this option).

Video
Bluetooth disconnection
Solution: 1. Upgrade the handle to the latest version; 2. Charge the handle; 3. Cancel pairing and re pair Bluetooth

Upgrade
The handle crashes/the light is always on/the machine does not start
Solution: Press the R key on the handle to reset and shut down (do not press it when charging, and do not press the power key at the same time). After fully charged, upgrade the handle to the latest firmware.

Detail
Not found Bluetooth name
1.First, cancel the pairing of Bluetooth in the phone, and then re open the Bluetooth search to re search. 2.Turn off the handle first, and then press and hold the power key for more than 8 seconds until the handle indicator flashes quickly.
Cannot find the upgrade Bluetooth name
You must turn off the phone first, and then press the upgrade mode combination to enter the upgrade mode. Older versions of mobile phones do not support upgrading, see the version details!

Detail
Bluetooth pairing failed
Turn off the handle first, then press and hold the power key for about 8 seconds, the blue light flashes and then release (this will clear the configuration file in the handle and generate a new Bluetooth address), Cancel the previous Bluetooth pairing on the phone and search again.
After Bluetooth connection - no function
Cancel all Bluetooth pairing on the phone (including Bluetooth headset, bracelet, etc.), and then re pair the MOCUTE handle. If not, restart the phone, restart the handle, and then connect it.
Mouse pointer appears after Bluetooth connection of BLE
1.It indicates that the mobile phone CPU may be MTK CPU of MediaTek. 2.The power on mode of the handle is wrong. Switch to the correct Android mode according to the manual, cancel the pairing and re pair.
How to connect a PC
Turn off the handle, press and hold [Direction right+power key] to power on.The Bluetooth is unpaired, and the computer is connected to find the Bluetooth name of the MOCUTE-PC again. The game in Steam is supported, and the MOCUTE can be found in the brain [printer/device] and tested. You can also download Tencent Game Assistant to play other games on your computer.

Q&A

Is there a delay in the handle?

How to calibrate the joystick?

How to restore the handle to factory settings?

Xiaomi/Hongmi can't use the handle normally?

Bluetooth disconnection

The handle crashes/the light is always on/the machine does not start

Not found Bluetooth name

Cannot find the upgrade Bluetooth name

Bluetooth pairing failed

After Bluetooth connection - no function

Mouse pointer appears after Bluetooth connection of BLE

How to connect a PC